Cảm biến hiện diện/vắng mặt, sử dụng hồng ngoại thụ động (PIR), gắn trần, giao tiếp KNX
Liên hệ
Nhập nội dung mô tả ngắn
Mô tả sản phẩm
Information Products
Bình luận
EBDSPIR-KNX is a compact PIR detector suitable to be mounted either flush or in a surface mount box. Designed with switch input connectors, the simple to install EBDSPIR-KNX is suitable for narrow ceiling voids and still offers sensitive detection.
The EBDSPIR-KNX detects movement using a PIR detector and turns the load on. When an area is no longer occupied the load will switch off after an adjustable time-out period. Configuration of devices on the KNX bus is via the standard ETS software application, allowing all aspects of the presence detectors behaviour to be configured and controlled.
Key Product Features:
Range up to 7m at 2.8m mounting height
Two ELV switch inputs to manually override the dimming levels and / or override the lights on or off
KNX programming mode accessible with IR handset and also by using the push switch on the back of the unit
Programmable logic block. This allows conditions to be set. For example: send the occupancy telegram only if the switch is pressed and the lux is low
Full scene selection functionality selectable via the UHS7 infrared handset e.g. scene, on, off, raise and lower
All functionality is fully programmable using the KNX ETS commissioning software
EBDSPIR-KNX is a compact PIR detector suitable to be mounted either flush or in a surface mount box. Designed with switch input connectors, the simple to install EBDSPIR-KNX is suitable for narrow ceiling voids and still offers sensitive detection.
The EBDSPIR-KNX detects movement using a PIR detector and turns the load on. When an area is no longer occupied the load will switch off after an adjustable time-out period. Configuration of devices on the KNX bus is via the standard ETS software application, allowing all aspects of the presence detectors behaviour to be configured and controlled.
Key Product Features:
Range up to 7m at 2.8m mounting height
Two ELV switch inputs to manually override the dimming levels and / or override the lights on or off
KNX programming mode accessible with IR handset and also by using the push switch on the back of the unit
Programmable logic block. This allows conditions to be set. For example: send the occupancy telegram only if the switch is pressed and the lux is low
Full scene selection functionality selectable via the UHS7 infrared handset e.g. scene, on, off, raise and lower
All functionality is fully programmable using the KNX ETS commissioning software
5 year warranty included
Manufactured in the UK